Equipment: Hyperconcentrator
Generators | Hyperconcentrator | Ozone Monitor | Ozone Destruct | In-line Contactor
Maximum transfer of gaseous ozone into water
The Hyperconcentrator is a fully integrated compact ozone contacting system designed to maximize the transfer of gaseous ozone into water and deliver a continuous stream of highly ozonated water to the point-of-use. The patented system allows users to achieve contact time values faster and with repeatable success.
The Hyperconcentrator can be flow rated up to 300 gpm. Equipped with a proprietary degassing process, the Hyperconcentrator removes unwanted air from its contact tank, delivering a stream of pressurized ozonated water that is bubble free. With the Hyperconcentrator, ozone concentrations in excess of 10 ppm (mg/l) can be achieved in seconds and maintained throughout the treatment process.
The Hyperconcentrator includes the following: stainless steel contact tank, stainless steel recirculation pump, Water Safety Drain, SS static mixer, PVDF venturi/eductor with backflow preventer. All piping is electro-polished stainless steel with tri-clamp sanitary fittings.
The sanitation of food, facility and equipment surfaces is extremely important in ensuring the quality and safety of food products. Most aqueous ozone contacting systems fail to provide adequate sanitation because of their poor hydrodynamic behaviors and mass transfer characteristics. On average, water with ozone levels in excess of 2-10 ppm (mg/l) applied for 15-60 seconds is normally required to achieve LD99 CT values in common rinse water systems. These modified LD99 CT values are determined by the amount of free disinfectant (C) multiplied by the available contact time (T) in your rinse waters.
In comparison to chlorine, ozone requires less time and lower concentrations to achieve LD99 CT Values. Ozone, unlike chlorine, remains in the antimicrobial form within a broader pH range.
Highlights
- Ozone concentration levels in excess of 10 ppm in water
- Bubble-free, pressurized ozonated water
- Patented contacting system
- Durable stainless steel construction with triclamp fittings
- Compact, and easy to clean and maintain
- Sized for all applications
- Produces consistent ozone concentration at variable flow rates
Other Applications
- Clean-in-place/equipment sanitization
- Product sanitization in flume waters
- Sanitation of containers
- Advanced oxidation
- Groundwater remediation
- Wastewater treatment
|
Ozone Advantages
Ozone is the safest and most natural purification and disinfection agent for fresh produce. It is approved by the FDA and USDA as a food contact substance and is certified organic.
Ozone’s method of action is to destroy the cell wall of the organism upon contact. Because it works instantly, ozone does not enable the development of resistant pathogen strains, an increasing problem for the produce industry.
Generated from the oxygen in air, ozone reverts to pure oxygen after doing its job, leaving no residue on produce. Ozone is made on-site; no delivery or storage of toxic chemicals required. At the levels Novazone recommends, ozone is safe for people, product, equipment and the environment. |
Specifications
Welded stainless steel,
rated 135 Psi |
40 psi |
40 psi |
Tri clamp SS sanitary |
Motor 208/460v 3 phase l1, l2, l3, grd. |
120V 1 phase |
|
¼” stainless steel tube |
Venturi eductor with check valve |
Patented static mixer |
Float control valve, 3/8 stainless tubing |
½” Triclamp with cap |
In-let pressure regulator or solenoid |
|
Dissolved ozone monitor and probe |
|
Hydrogen peroxide feed pump |
|
Delivery Range GPM |
PUMP HP |
TANK VOL GAL |
INLET/ OUTLET TRI-CLAMP |
MAX OPER PSI |
TANK FINISH |
TANK MATERIAL |
5-30 |
5 |
50 |
2” |
40 |
High luster swirl |
304SS* |
20-45 |
5 |
75 |
2” |
40 |
High luster swirl |
304SS* |
20-100 |
7.5 |
150 |
3” |
40 |
High luster swirl |
304SS* |
25-200 |
10 |
300 |
3” |
40 |
High luster swirl |
304SS* |
30-300 |
15 |
600 |
4” |
40 |
High luster swirl |
304SS* |
Spray Washing
|
